diff --git a/apps/m9zCtrlTty/build.bat b/apps/m9zCtrlTty/build.bat
deleted file mode 100644
index 0121550..0000000
--- a/apps/m9zCtrlTty/build.bat
+++ /dev/null
@@ -1,47 +0,0 @@
-@echo off
-setlocal enabledelayedexpansion
-
-REM 处理架构参数（第三个参数）
-if "%3"=="" (
-    set "goarch=amd64"
-    set "releasePath=x86_64"
-) else if "%3"=="arm" (
-    set "goarch=arm"
-    set "releasePath=arm"
-) else if "%3"=="arm64" (
-    set "goarch=arm64"
-    set "releasePath=arm64"
-) else if "%3"=="loong64" (
-    set "goarch=loong64"
-    set "releasePath=loong64"
-) else (
-    echo 目标 %3 无法编译
-    exit /b 1
-)
-
-REM 处理操作系统参数（第二个参数）
-if "%2"=="linux" (
-    echo 交叉编译目标为linux+%goarch%
-    set "CGO_ENABLED=0"
-    set "GOOS=linux"
-    set "GOARCH=%goarch%"
-    go build -o "%~n1-!releasePath!" %1
-) else if "%2"=="windows" (
-    echo 交叉编译目标为windows+%goarch%
-    set "CGO_ENABLED=0"
-    set "GOOS=windows"
-    set "GOARCH=%goarch%"
-    go build -o "%~n1-!releasePath!.exe" %1
-) else if "%2"=="darwin" (
-    echo 交叉编译目标为maxos+%goarch%
-    set "CGO_ENABLED=0"
-    set "GOOS=darwin"
-    set "GOARCH=%goarch%"
-    go build -o "%~n1-!releasePath!" %1
-) else (
-    echo 参数不正确: %2
-    exit /b 1
-)
-
-echo 脚本执行结束...
-endlocal
\ No newline at end of file
diff --git a/apps/m9zCtrlTty/build.sh b/apps/m9zCtrlTty/build.sh
deleted file mode 100755
index 7beb43e..0000000
--- a/apps/m9zCtrlTty/build.sh
+++ /dev/null
@@ -1,51 +0,0 @@
-case $3 in
-    "")
-    goarch="amd64"
-    releasePath="x86_64"
-    break
-    ;;
-    "arm")
-    goarch="arm"
-    releasePath="arm"
-    break
-    ;;
-    "arm64")
-    goarch="arm64"
-    releasePath="arm64"
-    break
-    ;;
-    "loong64")
-    goarch="loong64"
-    releasePath="loong64"
-    break
-    ;;
-    *)
-    echo '目标 ' $3 ' 无法编译'
-    exit
-    ;;
-esac
-
-buildfile=$1
-
-
-case $2 in
-    "linux"|"l")  echo '交叉编译目标为linux+'$goarch
-    echo "CGO_ENABLED=0 GOOS=linux GOARCH="$goarch" go build "$1
-    CGO_ENABLED=0 GOOS=linux GOARCH=$goarch go build -o ./"${buildfile%%.*}-"$releasePath $1
-    break
-    ;;
-    "windows"|"w")  echo '交叉编译目标为windows+'$goarch
-    echo "CGO_ENABLED=0 GOOS=windows GOARCH="$goarch" go build "$1
-    CGO_ENABLED=0 GOOS=windows GOARCH=$goarch go build  -o ././"${buildfile%%.*}-"$releasePath".exe"  $1
-    break
-    ;;
-    "darwin")  echo '交叉编译目标为maxos+'$goarch
-    echo "CGO_ENABLED=0 GOOS=darwin GOARCH="$goarch" go build "$1
-    CGO_ENABLED=0 GOOS=darwin GOARCH=$goarch go build -o ./"${buildfile%%.*}-"$releasePath $1
-    break
-    ;;
-    *)  echo '参数不正确:'$goarch
-    break
-    ;;
-esac
- echo '脚本执行结束...'
diff --git a/需求.md b/需求.md
index 2a842cf..b2294df 100644
--- a/需求.md
+++ b/需求.md
@@ -1,7 +1,3 @@
-触摸屏问题描述：
-1.扫描数量超过6个，实时监控页面无法全部显示，需要整改 ，先给/m9z/getDeviceStatus2 原代码注释，然后固定返回一个演示数据来测试
-1.1 我用演示数据返回 10个故障，页面会把最下面一排的百分比数据挤出屏幕，就只能下滑才能看到，需要给我一个优化方案，实际操作下滑很困难
-
-2.给我说明一下目前故障信息入库，我需要确认
-客户反应 ： 同样的故障信息时间不一致，没保存进报警预览
-我的印象：当天同回路的同故障码不会入库
+# 需求
+1、实时监控页面 故障信息简洁一点，不要显示那么多，显示两行就可以了
+2、原有的调光条要保留